DeWalt 60V Max FlexVolt 16" Chainsaw Kit vs DeWalt 60V Max FlexVolt 18" Chainsaw Kit
Tinted cells mark the better figure on that row alone: more engine, longer bar, lighter, cheaper. A lighter weight is only a win on the same basis.
What owners like and complain about
DeWalt 60V Max FlexVolt 16" Chainsaw Kit
- Shares 60V FlexVolt packs with DeWalt's miter saws, grinders, and blowers, and the packs step down to 20V tools
- Tool-free chain tensioning and a quarter-turn oil cap make bar service quick
- DeWalt's figure is 70 cuts per charge in 6x6 pressure-treated pine on the 3.0Ah FlexVolt pack
- 12.2 lb bare keeps it manageable for a 16" saw once you work off a second battery
- Kit price around $389 undercuts the Milwaukee and Makita 16" kits by $100 or more
- Oil leakage is the dominant owner complaint — saws weeping from new and puddling in storage with the reservoir drained
- Repeated reports of the oil pump delivering only a mist, which ruins bars and chains quickly
- Owners report tensioner failures after a few hours of use, letting the chain run slack
- Recessed oil filler sits in a sawdust trap, so debris gets into the reservoir unless you clean it first
- 3-year warranty, shorter than EGO's five and Milwaukee's five
- Narrow-kerf .043" chain on a 16" bar limits it in hardwood compared with .050 rivals
DeWalt 60V Max FlexVolt 18" Chainsaw Kit
- Full .050 gauge on 3/8" low-profile — the most widely stocked loop size in America, not a proprietary narrow kerf
- 11.1 lb bare for an 18" saw, lighter than most battery saws two inches shorter
- DeWalt claims 26% more peak power and up to 2.5x the torque of a 40.9cc gas saw
- Metal bucking spikes and an onboard wrench for tensioning rather than a plastic dial
- Street price around $395-$439 for the kit, well under the 18" Makita and 20" Milwaukee
- The included DCB609 is only 3.0Ah at 60V — a small tank behind an 18" bar
- 3-year limited warranty, half of EGO's and Milwaukee's tool coverage
- No case in the X1 kit, just a bar sheath and tensioning tool
- The FlexVolt oiler is the range's known weak point — see the 16-inch DCCS670 entry on this site — so check bar oil delivery on the first tank
- Nothing on board tells you charge state — you read the pack, not the saw

