Makita 18V X2 LXT 14" Chainsaw Kit

Makita / Battery / Homeowner

Makita 18V X2 LXT 14" Chainsaw Kit

40cc class (by bar)
36V
5 Ah pack
14 in
cuts to about 12 in
11 lb
with two 5.0Ah batteries (8.2 lb bare)
~$629
approx., kit with four 5.0Ah batteries and a dual-port charger
Check price on Amazon

We may earn a commission. Price and availability on Amazon's site may differ.

Same trick as Makita's 16" saw — two 18V LXT packs wired in series for 36V — on a shorter bar and a lighter body. 32cc-gas equivalence, 3,940 FPM chain speed, 8.2 lb bare and 11 lb with a pair of 5.0Ah packs fitted. The XCU03PT1 is the four-battery SKU, and that is the point of it: Makita ships two spare packs and a dual-port charger so you can keep cutting while two charge, which is how this platform is actually meant to be run. The limits are structural. It eats two batteries per charge instead of one, so every runtime figure costs twice the pack capacity, and 14" with narrow-kerf .043 chain is a limbing and small-bucking saw. Note the price: $629 for a 14" saw reads badly until you count four 5.0Ah LXT packs, which alone retail for most of it.

Best for: LXT-invested owners who want a quiet, well-built 14" limbing saw and will use the four batteries across their other Makita tools.

Specifications

Engine class
40cc class (placed by shipped bar length)
Single-pass cut
about 12 in (bar minus 2)
Chain
3/8" low-profile pitch / .043" gauge
Weight
11 lb, with two 5.0Ah batteries (8.2 lb bare)
Power type
Battery
Use case
Homeowner
Warranty
3-year tool & battery
Model
XCU03PT1

Manufacturer figures except the engine class and single-pass cut, which are derived here. What each spec means

  • Four 5.0Ah packs in the kit
  • 3,940 FPM chain
  • 8.2 lb bare

Where it is strong

  • Four 5.0Ah LXT packs and a dual-port rapid charger in the box — most of the price is battery you can use elsewhere
  • 8.2 lb bare, among the lightest 14" saws of any power source
  • Makita quotes up to 380 cuts in 4x4 cedar across the four included batteries
  • Captured bar nuts and a tool-less chain adjuster; the bar hardware does not get lost in the grass
  • Brushless, and the X2 layout puts both packs over the handle, which is why it is one of the quieter and smoother saws in the class

Where it falls short

  • Consumes two 18V packs per charge, so effective runtime per dollar of battery is half what a single-pack saw gives
  • $629 is a lot of money against 14" rivals, and only makes sense if you want the four packs
  • Narrow-kerf .043" chain and a 14" bar keep it out of serious bucking
  • 3-year tool and battery warranty, shorter than EGO's 5-year tool coverage
  • Both battery doors must be closed and both packs charged; one weak pack drops the whole saw's output

Written from the spec sheet and the maker's documentation; owner reports for this model were too thin to summarize.

Compare the Makita 18V X2 LXT 14" Chainsaw Kit

Nearest alternatives

More from Makita
Makita 40V Max XGT 16" Chainsaw Kit

Makita / Battery

~$629

Makita 40V Max XGT 16" Chainsaw Kit

40cc class (by bar)
40V
pack
16 in
bar
13.9 lb
bare

Makita XGT platform owners who want a fast, well-built 16" saw for property maintenance and don't mind premium battery costs.

Farm & Ranch4.3/5 Home Depot
Makita 40V Max XGT 14" Top Handle Chainsaw Kit

Makita / Battery

~$629

Makita 40V Max XGT 14" Top Handle Chainsaw Kit

40cc class (by bar)
40V
pack
14 in
bar
9.2 lb
bare

Working climbers already on XGT who want the lightest well-sealed top handle they can get with a battery fitted.

Arborist
Makita 18V X2 LXT 16" Top Handle Chainsaw Kit

Makita / Battery

~$599

Makita 18V X2 LXT 16" Top Handle Chainsaw Kit

40cc class (by bar)
36V
pack
16 in
bar
10.3 lb
bare

Climbers and tree crews on 18V LXT who want maximum reach from a top handle at the lowest possible weight.

Arborist

Sources for this entry