Husqvarna 535i XP

Husqvarna / Battery / Professional

Husqvarna 535i XP

40cc class (by bar)
14 in
cuts to about 12 in
5.29 lb
tool only, without battery or cutting equipment
~$490
approx., tool only — no battery or charger included
See it at Husqvarna

Price and availability on Husqvarna's site may differ.

Five and a quarter pounds of rear-handle saw, which is less than most top-handles weigh, and the reason tradespeople rather than tree crews tend to end up with this one. Husqvarna rates its 1.9 hp output as roughly 35cc-gas equivalent and pairs it with a narrow .325 mini / .043 chain, so it cuts small material fast and quietly — carpentry, formwork, construction trimming, light tree care. The $490 figure is the tool alone: no battery, no charger. A 40-B220X pack and a charger realistically push the working total past $800, and that is the number to compare against a gas 35cc saw, not the shelf price. The 14-inch maximum bar is the hard ceiling and it is a real one at this output. It does buy into the BLi-X professional platform, so packs are shared with Husqvarna's pro trimmers, blowers and pole saws.

Best for: Tradespeople and light tree-care crews who already own BLi-X batteries and want the lightest pro rear-handle saw available.

Specifications

Engine class
40cc class (placed by shipped bar length)
Bar range
10-14 in
Single-pass cut
about 12 in (bar minus 2)
Chain
.325" mini pitch / .043" gauge (X-Cut SP21G)
Weight
5.29 lb, tool only, without battery or cutting equipment
Power type
Battery
Use case
Professional
Warranty
2-year commercial (Husqvarna limited)
Model
535i XP

Manufacturer figures except the engine class and single-pass cut, which are derived here. What each spec means

  • 5.29 lb rear-handle
  • 35cc-gas equivalent output
  • BLi-X pro battery platform

Where it is strong

  • 5.29 lb bare — lighter than many top-handle saws, let alone rear-handles
  • Narrow-kerf .325 mini / .043 X-Cut chain cuts small wood fast with little power
  • Quiet and emission-free, which is what gets a saw allowed indoors or on occupied sites
  • Shares BLi-X packs with Husqvarna's professional trimmers, blowers and pole saws
  • Inertia-activated chain brake and pro-grade build at a sub-$500 tool-only price

Where it falls short

  • $490 is tool-only; a pack and charger push the real cost well past $800
  • 14-inch maximum bar and 1.9 hp — no felling, no firewood
  • .043 chain stock is pricier and harder to find than .050

Written from the spec sheet and the maker's documentation; owner reports for this model were too thin to summarize.

Compare the Husqvarna 535i XP

Nearest alternatives

More from Husqvarna
Husqvarna Power Axe 225i

Husqvarna / Battery

~$380

Husqvarna Power Axe 225i

40cc class (by bar)
40V
pack
14 in
bar
6.83 lb
bare

Homeowners with a small yard who want a battery saw for pruning and light storm cleanup rather than firewood.

Homeowner
Husqvarna 542i XP

Husqvarna / Battery

~$710

Husqvarna 542i XP

40cc class (by bar)
40V
pack
14 in
bar
6.83 lb
bare

Professional crews who want a battery rear-handle they can lean on in bigger wood without stalling the drivetrain.

Professional
Husqvarna 540i XP

Husqvarna / Battery

~$1,010

Husqvarna 540i XP

40cc class (by bar)
40V
pack
16 in
bar
6.4 lb
bare

Pros and serious landowners doing high-volume brushing, small-tree felling, and storm work who value low weight over big-wood power.

Professional

Sources for this entry